Knovel Equations for Pressure Vessels
Below the complete list of equations:
|
PRESSURE VESSEL DESIGN ACCORDING TO ASME VIII Div.1 |
Refence documents |
001 |
Allowable Stress Calculation |
- ASME BPVC Part.
VIII Div.1 |
002 |
Shells under internal pressure – Cylindrical shell |
- ASME BPVC Part.
VIII Div.1 |
003 |
Shells under internal pressure – Conical shell |
- ASME BPVC Part.
VIII Div.1 |
004 |
Shells under internal pressure – Spherical shell |
- ASME BPVC Part.
VIII Div.1 |
005 |
Shells under internal pressure – Torispherical head |
- ASME BPVC Part.
VIII Div.1 |
006 |
Shells under internal pressure – Elliptical head |
- ASME BPVC Part.
VIII Div.1 |
007 |
Shells under internal pressure – Conical transitions without a knuckle |
- ASME BPVC Part.
VIII Div.1 |
008 |
Shells under internal pressure – Conical transitions with a knuckle |
- ASME BPVC Part.
VIII Div.1 |
009 |
Shells under external pressure - Cylindrical shell |
- ASME BPVC Part.
VIII Div.1 |
010 |
Shells under external pressure - Conical shell |
- ASME BPVC Part.
VIII Div.1 |
011 |
Shells under external pressure - Spherical shell and hemispherical head |
- ASME BPVC Part.
VIII Div.1 |
012 |
Shells under external pressure - Torispherical head |
- ASME BPVC Part.
VIII Div.1 |
013 |
Shells under external pressure - Elliptical head |
- ASME BPVC Part.
VIII Div.1 |
014 |
Shells under external pressure - Conical transitions without a knuckle |
- ASME BPVC Part.
VIII Div.1 |
015 |
Shells under external pressure - Conical transitions with a knuckle |
- ASME BPVC Part.
VIII Div.1 |
016 |
Shells openings in shells and heads – Radial nozzle in cylindrical shell (neck inserted nozzle through the vessel wall) |
- ASME BPVC Part.
VIII Div.1 |
017 |
Shells openings in shells and heads – Radial nozzle in cylindrical shell (nozzle neck abutting the vessel wall) |
- ASME BPVC Part.
VIII Div.1 |
018 |
Shells openings in shells and heads – Radial nozzle in cylindrical shell (pad reinforced radial nozzle) |
- ASME BPVC Part.
VIII Div.1 |
019 |
Shells openings in shells and heads – Radial nozzle in ellipsoidal head (inserted nozzle through the vessel wall) |
- ASME BPVC Part.
VIII Div.1 |
020 |
Shells openings in shells and heads – Radial nozzle in ellipsoidal head (nozzle with inside projection) |
- ASME BPVC Part.
VIII Div.1 |
021 |
Shells Openings in Shells and Heads – Hillside nozzle in cylindrical shell |
- ASME BPVC Part.
VIII Div.1 |
022 |
Flat heads - Flat unstayed circular heads attached by bolts |
- ASME BPVC Part.
VIII Div.1 |
023 |
Flat heads – Flat unstayed non-circular heads attached by welding |
- ASME BPVC Part.
VIII Div.1 |
024 |
Flat Heads – Integral flat head with a centrally located opening |
- ASME BPVC Part.
VIII Div.1 |
025 |
Spherically dished bolted covers – Thickness calculation for a type D head |
- ASME BPVC Part.
VIII Div.1 |
026 |
Braced and stayed surfaces - Braced and stayed surfaces |
- ASME BPVC Part.
VIII Div.1 |
027 |
Ligaments efficiency |
- ASME BPVC Part.
VIII Div.1 |
028 |
Jacketed vessels - Partial jacket |
- ASME BPVC Part.
VIII Div.1 |
029 |
Jacketed vessels - Half-pipe jacket |
- ASME BPVC Part.
VIII Div.1 |
030 |
Noncircular vessels - Unreinforced vessel of rectangular cross section |
- ASME BPVC Part.
VIII Div.1 |
031 |
Noncircular vessels- Reinforced vessel of rectangular cross section |
- ASME BPVC Part.
VIII Div.1 |
032 |
Layered vessels – Layered cylindrical shell |
- ASME BPVC Part.
VIII Div.1 |
033 |
Layered vessels – Layered hemispherical head |
- ASME BPVC Part.
VIII Div.1 |
034 |
Layered vessels – Maximum permissible gap in a layered cylindrical shell |
- ASME BPVC Part.
VIII Div.1 |
035 |
Evaluation of Vessels Outside of Tolerance – Shell Tolerances |
- ASME BPVC Part.
VIII Div.1 |
036 |
Evaluation of Vessels Outside of Tolerance - Local Thin Area |
- ASME BPVC Part.
VIII Div.1 |
037 |
Supports and attachments - Horizontal vessel with Zick’s analysis |
- ASME BPVC Part.
VIII Div.1 |
038 |
Supports and attachments – Vertical vessel, skirt design |
- ASME BPVC Part.
VIII Div.1 |
039 |
Flanged joints - Integral type |
- ASME BPVC Part.
VIII Div.1 |
040 |
Flanged joints - Loose type |
- ASME BPVC Part.
VIII Div.1 |
041 |
Clamped connections - Flange and clamp design procedure |
- ASME BPVC Part.
VIII Div.1 |
042 |
Tubesheets in shell and tube heat exchangers - U-Tube tubesheet (ASME VIII-1, Fig. UHX-12.1, configuration a) |
- ASME BPVC Part.
VIII Div.1 |
043 |
Tubesheets in shell and tube heat exchangers - U-Tube tubesheet (ASME VIII-1, Fig. UHX-12.1, configuration b) |
- ASME BPVC Part.
VIII Div.1 |
044 |
Tubesheets in shell and tube heat exchangers - U-Tube tubesheet (ASME VIII-1, Fig. UHX-12.1, configuration d) |
- ASME BPVC Part.
VIII Div.1 |
045 |
Tubesheets in shell and tube heat exchangers - U-Tube tubesheet (ASME VIII-1, Fig. UHX-12.1, configuration e) |
- ASME BPVC Part.
VIII Div.1 |
046 |
Tubesheets in Shell and Tube Heat Exchangers - Fixed Tubesheet Exchanger (ASME VIII-1, Fig. UHX-13.1, configuration a) |
- ASME BPVC Part.
VIII Div.1 |
047 |
Tubesheets in shell and tube heat exchangers – Fixed tubesheet exchanger (ASME VIII-1, Fig. UHX-13.1, configuration b) |
- ASME BPVC Part.
VIII Div.1 |
048 |
Tubesheets in shell and tube heat exchangers – Fixed tubesheet exchanger (ASME VIII-1, Fig. UHX-13.1, configuration d) |
- ASME BPVC Part.
VIII Div.1 |
049 |
Tubesheets in Shell and Tube Heat Exchangers - Stationary Tubesheet (ASME VIII-1, Fig. UHX-14.2, configuration a) |
- ASME BPVC Part.
VIII Div.1 |
050 |
Tubesheets in Shell and Tube Heat Exchangers - Stationary Tubesheet (ASME VIII-1, Fig. UHX-14.2, configuration b) |
- ASME BPVC Part.
VIII Div.1 |
051 |
Tubesheets in Shell and Tube Heat Exchangers - Stationary Tubesheet (ASME VIII-1, Fig. UHX-14.2, configuration d) |
- ASME BPVC Part.
VIII Div.1 |
052 |
Tubesheets in Shell and Tube Heat Exchangers - Stationary Tubesheet (ASME VIII-1, Fig. UHX-14.2, configuration e) |
- ASME BPVC Part.
VIII Div.1 |
053 |
Bellows expansion joints – U-Shaped unreinforced bellows expansion joint |
- ASME BPVC Part.
VIII Div.1 |
054 |
Bellows expansion joints – Toroidal bellows expansion joint |
- ASME BPVC Part.
VIII Div.1 |
055 |
Tube-to-tubesheet welds – Full strength welds |
- ASME BPVC Part.
VIII Div.1 |
056 |
Tube-to-tubesheet welds – Partial strength welds |
- ASME BPVC Part.
VIII Div.1 |
057 |
Pressue testing requirements - Determination of hydrostatic test pressure |
- ASME BPVC Part.
VIII Div.1 |
058 |
Pressue testing requirements - Determination of pneumatic test pressure |
- ASME BPVC Part.
VIII Div.1 |
|
LOADS ANALYSIS FOR PRESSURE VESSELS |
|
059 |
Determination of wind loads on pressure vessels |
-ASCE Wind loads for
petrochemical and other industrial facilities |
060 |
Determination of seismic loads on pressure vessels |
-ASCE Wind loads for
petrochemical and other industrial facilities |
061 |
Estimating weights of vessels and vessel components |
Pressure Vessel Design Manual - Dennis R. Moss and Michael Basic - Elsevier |
|
PRESSURE VESSEL DESIGN ACCORDING TO EN 13445 |
|
062 |
Allowable Stress Calculation |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
063 |
Shells under internal pressure - Cylindrical and spherical shells |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
064 |
Shells under internal pressure - Dished end |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
065 |
Shells under internal pressure - Cones and conical ends |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
066 |
Shells under internal pressure - Nozzles which encroach into the knuckle region |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
067 |
Shells under external pressure - Cylindrical shells |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
068 |
Shells under external pressure - Conical shell |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
069 |
Shells under external pressure - Spherical shells |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
070 |
Shells under external pressure - Vessel ends |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
071 |
Openings in shells - Isolated openings |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
072 |
Openings in shells - Multiple openings |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
073 |
Openings in shells - Openings close to a shell discontinuity |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
074 |
Flanges - Narrow face gasketed flanges |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
075 |
Flanges - Full face flanges with soft ring type gaskets |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
076 |
Flanges - Seal welded flanges |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
077 |
Flanges - Reverse narrow face flanges |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
078 |
Flanges - Reverse full face flanges |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
079 |
Flanges - Full face flanges with metal to metal contact |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
080 |
Additional non-pressure loads - Local loads on nozzles in spherical shells |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
081 |
Additional non-pressure loads - Local loads on nozzles in cylindrical shells |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
082 |
Additional non-pressure loads - Line loads |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
083 |
Additional non-pressure loads - Lifting lugs |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
084 |
Additional non-pressure loads - Horizontal vessels on saddle supports |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
085 |
Additional non-pressure loads - Horizontal vessels on ring supports |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
086 |
Additional non-pressure loads - Vertical vessels on bracket supports |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
087 |
Additional non-pressure loads - Vertical vessels with supporting legs |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
088 |
Additional non-pressure loads - Vertical vessels with skirts |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
089 |
Additional non-pressure loads - Vertical vessels with ring supports |
- EN 13445 – Unfired pressure vessels – Part 3: Design |
|
PRESSURE RELIEF DEVICES |
|
090 |
Capacity requirements |
- ASME PTC 25-2014 Pressure relief devices |
091 |
Sizing and Selection – sizing for vapors and gases |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
092 |
Sizing and Selection – sizing for steam |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
093 |
Sizing and Selection – sizing for liquid |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
094 |
Sizing and Selection – Sizing for air |
- Pressure Relief Devices ASME and API Code Simplified – Mohammed A. Malek – McGraw-Hill |
095 |
Sizing and Selection – Sizing multiple valves |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
096 |
Sizing and Selection – Saturated-water valve sizing |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
097 |
Sizing and Selection – Sizing for thermal expansion of trapped liquids |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
098 |
Sizing and Selection – Sizing for mixed phases |
- Pressure Relief
Devices ASME and API Code Simplified –
Mohammed A. Malek – McGraw-Hill |
099 |
Reaction forces due to valve discharge |
-API RP 520 |
100 |
Sizing pressure relief devices with the corresponding pipes according to EN 13136 |
- EN 13136 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |